Monthly Archives: October 2018

//October

Torres 2 Copper Downspout Brackets Round Two

Torres 2 Copper Downspout Brackets Round Two
Rate this post

Torres 2 Copper Downspout Brackets Round Two.
So far 60 Brackets. We will probably have another 4 orders or so till we get them all done for the project.
Although Simplistic in Design – They are very tricky to do. One of the most difficult things is the Drilling and Tapping of the holes for the Stand Offs. This requires 2 holes to be drilled through the Stand Off. These holes then have to be tapped. Drilling parallel holes is only a little tricky but the tapping is a pain. Easier to tap steel than copper. Copper is “Grabby” and if you […]

By |2018-10-31T16:34:47+00:00October 31st, 2018|Copper Downspout Brackets|0 Comments

AutoClear PCSS in Custom Color Downspout Cleanout Leaf Diverter for Aluminum Downspouts

AutoClear PCSS in Custom Color Downspout Cleanout Leaf Diverter for Aluminum Downspouts
Rate this post

10 AutoClear PCSS in Custom Color.

By |2018-10-28T22:04:00+00:00October 28th, 2018|AutoClears, PCSS|0 Comments

AutoClear PCSS in Bronze Downspout Cleanout Leaf Diverter for Aluminum Downspouts

AutoClear PCSS in Bronze Downspout Cleanout Leaf Diverter for Aluminum Downspouts
Rate this post

AutoClear PCSS in Bronze Downspout Cleanout Leaf Diverter for Aluminum Downspouts

We are in process of getting our Paint Line in order. With the multitude of Colors and Manufacturers there are a lot of colors to deal with. Just in this case of Bronze in just 3 days we have 5 different Bronzes to match. Our Goal is to have all manufacturers Paint on hand to Paint our AutoClear PCSS Series to closely match all. Yes this is a huge undertaking. But we only want to deliver the Best!

Next Color we are working on is Dark Bronze. Think we have that […]

By |2018-11-17T12:53:32+00:00October 26th, 2018|AutoClears, PCSS|0 Comments

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Rectangular Copper Downspouts

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Rectangular Copper Downspouts
5 (100%) 1 vote

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Rectangular Copper Downspouts.
There are a lot of AutoClears for this Order. 36 to be exact. This Quantity for a single order finally breaks the old record of 32 which held for a few years!
The Inlets are all for 4″ by 3″ Downspouts but there are 3 sizes and types of Outlets. 4″ Round, 4″ by 3″ downspout and then smaller 3-1/2″ by 2-1/2″ PVC type.

We also included “Diverter Plates” with this order for a few of the AutoClears. Diverter Plates forcibly direct the water from the inlet to the Rear […]

By |2018-10-12T13:13:27+00:00October 12th, 2018|Brasstonian AutoClears|0 Comments

HRFDT Copper Gutter Brackets for 6″ Half Round Copper Gutters

HRFDT Copper Gutter Brackets for 6″ Half Round Copper Gutters
Rate this post

HRFDT Copper Gutter Brackets for 6″ Half Round Copper Gutters.
Last 160 for this project. Total Brackets for the Project 1,120. This is a new Record for total for an order.

We are now moving on the Downspout Brackets. 30 shipped so far out of about 200 needed.

By |2018-10-07T14:59:22+00:00October 7th, 2018|Copper Gutter Brackets|0 Comments

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Copper Downspouts

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Copper Downspouts
5 (100%) 1 vote

3 for this Order. Next order we have in process is for 36. Record month for AutoClears.

By |2018-10-04T11:49:13+00:00October 4th, 2018|AutoClears, Brasstonian AutoClears|0 Comments