Blog

/Blog/

NERCA Seaport World Trade Center, Boston, MA March 28 – 29, 2018

Rate this post

Seaport World Trade Center, Boston, MA
March 28 – 29, 2018

Our Friends -Cambridge Street Metal Corp. – will be at Booth #525! Be Sure to Stop By and Visit them. One of the items they will have there are our AutoClear Brasstonian Series AutoClears.

We are in process of Gearing Up Inventory of AutoClear™ Brasstonian Series with Standard Rod Packs for 4″ Round Copper Downspouts.

By |2018-11-13T14:08:30+00:00March 20th, 2018|0 Comments

AutoClears Inventory Build Up

Rate this post

We are building up Inventory.

Finally got to 30 in Process! We will have 10 for 4″ Round Downspouts near completion by Wednesday or so – to get some in the Shop Store as Stock Inventory. Still have to get some Rod Packs made – but should be on that this week and get at least 10 Standards done to match the count of AutoClears ready to go out the door. The other 20 will just be “Shells” waiting on Downspout Inlet / Outlet Configurations. Those will be shelved till sold or to replace the 4″ Rounds as they leave the […]

By |2018-03-18T15:41:49+00:00March 18th, 2018|1 Comment

AutoClear Inventory at Shop Store

Rate this post

Well back down to zero inventory at our Shop Store for AutoClear Brasstonian Series!

We have 7 in process for 4″ Round Downspouts with Standard Rod Packs. So trying to slip those in our work load – and could be in Shop Store Inventory by the weekend and get that type out of “Back Order” status and show some in stock.

We have the next round in process also for 30 more AutoClears – but we will only take those to the “Box” stage – no inlets or outlets so we can get a jump on other Downspout Sizes – Configurations other […]

By |2018-05-14T16:03:56+00:00March 13th, 2018|0 Comments

Radmont Radius Ornamental Copper Downspout Bands Straps with RDS Copper Downspout Brackets

Radmont Radius Ornamental Copper Downspout Bands Straps with RDS Copper Downspout Brackets
5 (100%) 2 votes

Radmont Radius Ornamental Copper Downspout Bands Straps with RDS Copper Downspout Brackets

We are making the pressed Button just a bit more deeper and defined for this order. The Freedom Gray Button is Standard Depth but we are pushing the envelope…you can see a little bit of difference between the two…

Getting there…

Looks like a mess on the bench right now but things moving to final before assembly…..

Putting a wrap on the project

Done and now going to packaging…

By |2018-05-17T07:37:43+00:00December 4th, 2017|0 Comments

Copper Planter Boxes

Rate this post

Copper Planter boxes for TJ
Doing the large one first…

This one is 86″ wide  and 14″ tall.
The last picture shows a Square to help get a better feel for the angle of the sides. Camera Parallax kind of messes with what the angle really looks like…

Far away shot of the Planter Box and one with Zoom

Start of excess solder cleanup on the exterior…

Notice that the back appears to be on an angle…but it is really vertical so the planter box rests against the wall perfectly vertically….just the way a picture is shot at a particular angle and then […]

By |2018-05-17T07:43:31+00:00November 24th, 2017|0 Comments

Nemours 2 Copper Leader Head Collector Box in Prototype

Rate this post

Nemours 2 Copper Leader Head Collector Box in Prototype

These Leader Heads are 18″ wide by 10″ deep and 14″ tall. They will have a Scupper Trough attached to the back that will be 8″ long. The order calls for 5 but they want 2 ASAP. Started this from scratch on Tuesday. So all new design work to figure out the blanks. New Fixtures to cut and miter the blanks. Moving along pretty good for all aspects. This profile is about 2-1/2″ taller than the Original Nemours…and we really like the new look.

Ok. They are Fabricated and ready for Final […]

By |2018-05-17T07:53:24+00:00November 9th, 2017|0 Comments

Dorchester 2 Freedom Gray Ornamental Copper Downspout Bands Straps

Dorchester 2 Freedom Gray Ornamental Copper Downspout Bands Straps
5 (100%) 4 votes

Dorchester 2 Freedom Gray Ornamental Copper Downspout Bands Straps

This will take awhile for this project as we are starting at Ground Zero. First was design of the Bands and then do the necessary CAD work to get the raw Die Set blanks laser cut.

Got a lot done actually. The Button looks good for roughing in.

Day 2

Working on die sets for the faces and sides (actually its the same die set as they are the same shape just different lengths and miters for the parts they will make).

Ok. Proved out the blank needs to be 5-3/16″ wide and had […]

By |2019-03-12T22:55:04+00:00July 21st, 2017|0 Comments