Ornamental Copper Downspout Bands Straps

/Tag: Ornamental Copper Downspout Bands Straps

Larchmont Galvanized Ornamental Downspout Bands for Custom Rectangular Downspouts

Larchmont Galvanized Ornamental Downspout Bands for Custom Rectangular Downspouts.

Fleur-de-Lis Ornamental Downspout Band Ears

Fleur-de-Lis Ornamental Downspout Band Ears only. This is half the order on the bench. You can see the other half stacked up in process. For same customer as the Spade ears. This order is for 202 Ears. So 101 on the bench.

By |2022-01-20T14:23:47+00:00January 17th, 2022|Ornamental Copper Downspout Bands|0 Comments

Fleur-de-Lis 3 Ornamental Decorative Copper Downspout Bands

Fleur-de-Lis 3 Ornamental Decorative Copper Downspout Bands. These were VERY tricky to produce. I have made 1000’s of bands over the years and this one was a true challenge. That little bead around the face was a real culprit. Normally in trials I can get a good ear produced in 4 to 6 attempts. This one took 23…

By |2021-03-11T21:12:35+00:00March 11th, 2021|Ornamental Copper Downspout Bands|1 Comment

Fleur-de-Lis Ornamental Decorative Copper Downspout Bands Straps

Fleur-de-Lis Ornamental Decorative Copper Downspout Bands Straps. Three types here. Two different sizes and then some tight width ones.

By |2020-11-25T13:29:31+00:00November 25th, 2020|Ornamental Copper Downspout Bands|0 Comments

Fleur-di-Lis 2 Ornamental Decorative Copper Downspout Bands Straps Hangers

Fleur-di-Lis 2 Ornamental Decorative Copper Downspout Bands Straps Hangers.
Notice the Brass Sheet Metal Screws. We supplied these to the customer as they are difficult to find.
Notice the picture of the 5/64″ drill bits. Pilot hole must be drilled first before you run the screws.

By |2020-10-21T12:55:29+00:00October 21st, 2020|Ornamental Copper Downspout Bands|0 Comments