Transitions

/Tag: Transitions

Rectangular Copper Downspout to Round Drain Transitions

Rate this post

Rectangular Copper Downspout to Round Drain Transitions

more transitions….

These were to transition a standard 4″ by 3″ Downspout to a 4″ Green Pipe Drain that was cut flush with the stone patio. We incorporated a PVC interior collar (a union cut in half) so that the Beauty Collar had a backing to protect it in case of a bump. Not bullet proof but would help to minimize the dent…

By |2018-10-05T22:27:16+00:00February 23rd, 2018|Custom Copper Fabrication|0 Comments

Rectangular Copper Downspout to Round Drain Transitions

Rate this post

Rectangular Copper Downspout to Round Drain Transitions

These were a little tricky. Transition a 4.00″ by 3.00″ Downspout into a 4″ drain but also have a collar on a 6 degree angle for the sill it is going through…
We also put gussets in the corners to help route the water into the drain…First of 12 or so for the project…plus two that will go into the wall face.

By |2018-10-05T22:27:59+00:00February 23rd, 2018|Custom Copper Fabrication|0 Comments