Ornamental Copper Downspout Bands

/Ornamental Copper Downspout Bands

Fleur-de-Lis Ornamental Decorative Copper Downspout Bands Straps

Fleur-de-Lis Ornamental Decorative Copper Downspout Bands Straps. Three types here. Two different sizes and then some tight width ones.

By |2020-11-25T13:29:31+00:00November 25th, 2020|Ornamental Copper Downspout Bands|0 Comments

Fleur-di-Lis 2 Ornamental Decorative Copper Downspout Bands Straps Hangers

Fleur-di-Lis 2 Ornamental Decorative Copper Downspout Bands Straps Hangers.
Notice the Brass Sheet Metal Screws. We supplied these to the customer as they are difficult to find.
Notice the picture of the 5/64″ drill bits. Pilot hole must be drilled first before you run the screws.

By |2020-10-21T12:55:29+00:00October 21st, 2020|Ornamental Copper Downspout Bands|0 Comments

Winthrop Ornamental Decorative Copper Downspout Bands Covers

Winthrop Ornamental Decorative Copper Downspout Bands Covers
While these fit 4″ Round Downspouts the customer requested an additional 1/4″ in depth

By |2020-09-24T17:20:15+00:00September 24th, 2020|Ornamental Copper Downspout Bands|0 Comments

Radmont Ornamental Decorative Copper Downspout Straps and AutoClear Brasstonian

Radmont Ornamental Decorative Copper Downspout Straps and Custom AutoClear Brasstonian.
This job was custom across the board. The Flange Depth of the bands had to accommodate fitting over the Wishbone style brackets that have the spring on the face. Plus just about all different depths because of the stone work that the downspouts mounted to. Each Band is Numbered per Customer’s Specifications for Downspout Location and also for Band Position. The AutoClear was made to go “Inline” style.

By |2020-08-19T11:56:58+00:00August 19th, 2020|Ornamental Copper Downspout Bands|0 Comments

Winthrop Ornamental Copper Downspout Bands Straps Covers

Winthrop Ornamental Copper Downspout Bands Straps Covers.
We have made almost 150 of these for the project…
These were for 4″ downspouts and a 1/4″ stand off.
We have made them for 4-3/8″ and 3-3/8″ diameter downspouts with zero stand off for the same project.

By |2020-09-16T19:41:11+00:00July 22nd, 2020|Ornamental Copper Downspout Bands|0 Comments

Classica Ornamental Decorative Copper Downspout Bands

Classica Ornamental Decorative Copper Downspout Bands. These are to fit 4″ and 6″ Round Copper Downspouts. Notice in the one picture that the depth (for 4″) is about 3/16″ greater than the downspout diameter. This added depth is to accommodate the Primary Mounting Strap that will actually mount the downspout to the wall. Same added depth for the 6″ as well.

By |2020-07-10T23:13:42+00:00April 20th, 2020|Ornamental Copper Downspout Bands|0 Comments