Recent Projects Blog

/Recent Projects Blog/

AutoClear Brasstonian Ultras Copper Downspout Clean Outs Leaf and Debris Diverters

AutoClear Brasstonian Ultras Copper Downspout Clean Outs Leaf and Debris Diverters with New Diverter Plate Design

In the constant effort of Making the Best Products Available World Wide we have improved the ULTRA Rod Pack Design.
In the past we have soldered a Diverter Plate to the back sides of the rods. The purpose of the Diverter Plate was to shave off the water that would actually be flowing down along the back sides of the rods with what is called capillary action. Like when you hose down a window – most of the water kind of sheets down the window and […]

By | 2018-11-13T11:38:43+00:00 November 13th, 2018|AutoClears, Brasstonian AutoClears|0 Comments

AutoClear Brasstonian for 4″ Round Copper Downspouts

LOL Well probably the worst pictures of an AutoClear we have ever taken.
We have 30 in production at the moment and all the benches are full so shot this on our Welding Table.
We moved this up in production to complete it and get it shipped as customer is making decision as to Brasstonian or PCSS.
So wanted to get it shipped out today so he could get it ASAP.

By | 2018-11-09T11:45:49+00:00 November 9th, 2018|Brasstonian AutoClears|0 Comments

Torres 2 Copper Downspout Brackets Round Two

Torres 2 Copper Downspout Brackets Round Two.
So far 60 Brackets. We will probably have another 4 orders or so till we get them all done for the project.
Although Simplistic in Design – They are very tricky to do. One of the most difficult things is the Drilling and Tapping of the holes for the Stand Offs. This requires 2 holes to be drilled through the Stand Off. These holes then have to be tapped. Drilling parallel holes is only a little tricky but the tapping is a pain. Easier to tap steel than copper. Copper is “Grabby” and if you […]

By | 2018-10-31T16:34:47+00:00 October 31st, 2018|Copper Downspout Brackets|0 Comments

AutoClear PCSS in Bronze Downspout Cleanout Leaf Diverter for Aluminum Downspouts

AutoClear PCSS in Bronze Downspout Cleanout Leaf Diverter for Aluminum Downspouts

We are in process of getting our Paint Line in order. With the multitude of Colors and Manufacturers there are a lot of colors to deal with. Just in this case of Bronze in just 3 days we have 5 different Bronzes to match. Our Goal is to have all manufacturers Paint on hand to Paint our AutoClear PCSS Series to closely match all. Yes this is a huge undertaking. But we only want to deliver the Best!

Next Color we are working on is Dark Bronze. Think we have that […]

By | 2018-10-30T16:05:13+00:00 October 26th, 2018|AutoClears, PCSS|0 Comments

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Rectangular Copper Downspouts

AutoClear Brasstonian with Standard Rod Packs for 4″ by 3″ Rectangular Copper Downspouts.
There are a lot of AutoClears for this Order. 36 to be exact. This Quantity for a single order finally breaks the old record of 32 which held for a few years!
The Inlets are all for 4″ by 3″ Downspouts but there are 3 sizes and types of Outlets. 4″ Round, 4″ by 3″ downspout and then smaller 3-1/2″ by 2-1/2″ PVC type.

We also included “Diverter Plates” with this order for a few of the AutoClears. Diverter Plates forcibly direct the water from the inlet to the Rear […]

By | 2018-10-12T13:13:27+00:00 October 12th, 2018|Brasstonian AutoClears|0 Comments

HRFDT Copper Gutter Brackets for 6″ Half Round Copper Gutters

HRFDT Copper Gutter Brackets for 6″ Half Round Copper Gutters.
Last 160 for this project. Total Brackets for the Project 1,120. This is a new Record for total for an order.

We are now moving on the Downspout Brackets. 30 shipped so far out of about 200 needed.

By | 2018-10-07T14:59:22+00:00 October 7th, 2018|Copper Gutter Brackets|0 Comments