Torres Copper Downspout Brackets for 4″ Round European Copper Downspouts
Torres Copper Downspout Brackets for 4″ Round European Copper Downspouts
These are in 3 different Stand Offs. 1″, 2-1/2″ and 2-3/4″.
Torres 2 Copper Downspout Brackets Round 4
Torres 2 Copper Downspout Brackets Round 4. Maybe 3 more rounds to get them all done.
Torres 2 Copper Downspout Brackets
Torres 2 Copper Downspout Brackets.
These are for the same project we are working on but at different stand offs.
U Style Copper Downspout Brackets with Bandit Bases
U Style Copper Downspout Brackets with Bandit Bases.
While we have “Discontinued” Bandit Bases we still did these for the customer.
This Bracket was also Custom Made to fit 3-3/4″ diameter downspouts.
Torres 2 Copper Downspout Brackets
Torres 2 Copper Downspout Brackets. Round 3 of about 7… so about another 120 to go….
Torres 2 Copper Downspout Brackets Round Two
Torres 2 Copper Downspout Brackets Round Two.
So far 60 Brackets. We will probably have another 4 orders or so till we get them all done for the project.
Although Simplistic in Design – They are very tricky to do. One of the most difficult things is the Drilling and Tapping of the holes for the Stand Offs. This requires 2 holes to be drilled through the Stand Off. These holes then have to be tapped. Drilling parallel holes is only a little tricky but the tapping is a pain. Easier to tap steel than copper. Copper is “Grabby” and if you […]
Torres 2 Copper Downspout Brackets for 4″ Round Copper Downspouts
Torres 2 Copper Downspout Brackets for 4″ Round Copper Downspouts
We originally did a Torres Bracket for first leg of this project about 10 years ago. This new Bracket is a Refinement of that bracket.
This round is in 7 phases and will require about 200 more. We will be doing 30 at a time…
RDS Copper Downspout Brackets for 5 Inch Round Copper Downspouts
RDS Copper Downspout Brackets for 5 Inch Round Copper Downspouts.
We confirmed that the Downspout Diameter was 5.00″ prior to fabrication.
European or Metric Size Downspouts can be 4-3/4″ so we were just making sure…
Also note that the bag for Hardware says 35 Sets. Only 28 are needed but this order will end up in New York City and Home Depot is not around the Corner…
Torres Copper Downspout Bracket for 4″ Round Copper Downspouts
We did these brackets about 10 years ago for the same project. 7 new Buildings…so we will have to make a couple hundred or so…
We are making Gutter Brackets for the project as well. Well Over 1000 of them. Thanks to our Buddy Kelly in Hawaii!