Fabrication Process

/Fabrication Process

Copper Planter Boxes

Rate this post

Copper Planter boxes for TJ
Doing the large one first…

This one is 86″ wide¬† and 14″ tall.
The last picture shows a Square to help get a better feel for the angle of the sides. Camera Parallax kind of messes with what the angle really looks like…

Far away shot of the Planter Box and one with Zoom

Start of excess solder cleanup on the exterior…

Notice that the back appears to be on an angle…but it is really vertical so the planter box rests against the wall perfectly vertically….just the way a picture is shot at a particular angle and then […]

By |2018-05-17T07:43:31+00:00November 24th, 2017|0 Comments

Yarmont Custom Leader Heads Boxes Freedom Gray

Yarmont Custom Leader Heads Boxes Freedom Gray
5 (100%) 3 votes

Yarmont Custom Leader Heads Boxes Freedom Gray.
This will be a little tricky. We cleaned the shop up real good to prepare for running this job. Don’t want any contaminants on the benches or any metal shavings as Freedom Gray is a non forgiving material. Job at this point has been blanked, marked for bend and radius points and in first round of bends on our main brake. It will require 3 of our brakes to accomplish the job. Our main brake, our project brake and our own custom designed and self built radius brake. Also this will be a new […]

By |2018-11-13T11:40:08+00:00July 14th, 2017|0 Comments