Leader Boxes Collector Heads

/Leader Boxes Collector Heads

Nemours 2 Copper Leader Head Collector Box in Prototype

Rate this post

Nemours 2 Copper Leader Head Collector Box in Prototype

These Leader Heads are 18″ wide by 10″ deep and 14″ tall. They will have a Scupper Trough attached to the back that will be 8″ long. The order calls for 5 but they want 2 ASAP. Started this from scratch on Tuesday. So all new design work to figure out the blanks. New Fixtures to cut and miter the blanks. Moving along pretty good for all aspects. This profile is about 2-1/2″ taller than the Original Nemours…and we really like the new look.

Ok. They are Fabricated and ready for Final […]

By |2018-05-17T07:53:24+00:00November 9th, 2017|0 Comments

Yarmont Custom Leader Heads Boxes Freedom Gray

Yarmont Custom Leader Heads Boxes Freedom Gray
5 (100%) 3 votes

Yarmont Custom Leader Heads Boxes Freedom Gray.
This will be a little tricky. We cleaned the shop up real good to prepare for running this job. Don’t want any contaminants on the benches or any metal shavings as Freedom Gray is a non forgiving material. Job at this point has been blanked, marked for bend and radius points and in first round of bends on our main brake. It will require 3 of our brakes to accomplish the job. Our main brake, our project brake and our own custom designed and self built radius brake. Also this will be a new […]

By |2018-11-13T11:40:08+00:00July 14th, 2017|0 Comments

Troubadour Leader Boxes / Collector Heads

Troubadour Leader Boxes / Collector Heads
5 (100%) 1 vote

Just started a project for 13 the other day…
Will post up some pictures of the Fabrication Process later today.

2/18/2017

Got though the Fabrication Process of the Blanks. Still needs one more bend but sometimes we wait till later until we put that one in. 26 Blanks with 9 Bends and 2 Radius Bends each Blank. That is 286 bends that all have to align perfectly to make the Leader Boxes / Heads / Collectors look Great! Might seem hard but this is one of the Simplest Profiles that we manufacture. We have 3 projects in process for this customer at this […]

By |2018-10-28T13:27:48+00:00February 18th, 2017|0 Comments