Copper Downspout Brackets

RDSBTR Copper Downspout Brackets for 3″ Round Downspouts at a 2-3/4″ Stand Off.

Knoke Copper Downspout Brackets for 4″ European Downspouts (100 mm – 3.937″).
30 for the project. Notice that we gave one extra set of Hardware….just in case…
Also you will see the Wrench in one picture. Best to turn the Nut as opposed to turn the screw to tighten.
You actually won’t have to put a Screwdriver into the head of the screw in most cases. Faster easier better.

Varni Copper Downspout Brackets Custom Size and Stand Offs.
There are 6 Brackets. There are 3 Stand Off Dimensions (2 per).
We made a special tool to hold the nuts as when working with 2″ wide Copper Bar Stock as gets VERY difficult to be able to hold those in place when trying to assemble. Ideally you insert the nut into the holder and then from the bottom side of the bracket hold nut in position until you can engage the screw. Then simply holding the nut with your finger tighten the screw until the lock washer engages. Then continue tightening until […]

Knoke Copper Downspout Brackets Hangers for 3″ Round Copper Downspouts.
These are for 3″ Downspouts that have a 9-5/16″ circumference. That is about 1/16″ less than most European styles.
There are 5 Different Stand Offs for the project.

RDSU Copper Downspout Brackets for 3″ Round Copper Downspouts

Torres Copper Downspout Brackets. Only 20 this time but just the High Work of this particular Building. We have made 100’s for this project…

Knoke Copper Downspout Brackets. Only 20 but job could be quite a bit more…

Knoke Copper Downspout Bracket Hanger. Just one to test fit for project. Could be about a couple hundred…
You will see two screws. One is 3/4″ and the other is 1″. Customer can choose which length is best for his needs for this sample.

Torres Copper Downspout Brackets. We have made 100’s of these for the ongoing project. These are for 3″ Round Downspouts.

Knoke Copper Downspout Brackets for 4″ Round Copper Downspouts.
Notice that there are 15 sets of Hardware – One set extra – just in case – been there did that…