Varni Copper Downspout Brackets Custom Size and Stand Offs

//Varni Copper Downspout Brackets Custom Size and Stand Offs

Varni Copper Downspout Brackets Custom Size and Stand Offs

Varni Copper Downspout Brackets Custom Size and Stand Offs.
There are 6 Brackets. There are 3 Stand Off Dimensions (2 per).
We made a special tool to hold the nuts as when working with 2″ wide Copper Bar Stock as gets VERY difficult to be able to hold those in place when trying to assemble. Ideally you insert the nut into the holder and then from the bottom side of the bracket hold nut in position until you can engage the screw. Then simply holding the nut with your finger tighten the screw until the lock washer engages. Then continue tightening until fully tight as you place pressure on the front side of the bracket to trap the downspout securely.
The Customer has 4-1/8″ downspouts (Diameter Confirmed).
You will see some extra Hardware. Easy to drop and lose the Nuts and Lock Washers. Been there did that.

By |2021-05-06T13:53:41+00:00May 6th, 2021|Copper Downspout Brackets|0 Comments

Leave A Comment