Torres Copper Downspout Brackets
Torres Copper Downspout Brackets. We have made 100’s of these for the ongoing project. These are for 3″ Round Downspouts.
I-ZINC Galvanized AutoClears and one PCSS
I-ZINC Galvanized AutoClears and one PCSS. A lot of pictures. Well as we were packaging up found out customer was painting White. To save him the bother of painting the Rod Packs we changed them out to White ones for him. Save him some time and effort.
AutoClears 2019 with Soldered Diverter Plates
AutoClears 2019 with Soldered Diverter Plates. Only a few left of these as we changed over to Removable for 2020. You can find these on EBay.
HRU Copper Gutter Brackets for Rafter Mount
HRU Copper Gutter Brackets for Rafter Mount. Just 2 for Sample Purpose. Could be 998 more…
You will notice in the pictures that we did one with Stainless Steel Screws. Some Architects prefer SS over Brass.
HRRM Copper Gutter Brackets Deja Vu
Ok. Well looks just like the last post. We do not send out “FREE SAMPLES”. Had a customer pay for two Brackets and said we should get his sample gutter on Friday. Well Thursday a sample came. So off to the races…made them and shipped. Well we got his sample actually on Friday like he said it would arrive. Different than the one we received on Thursday…So that one was from a different person…LOL. So back to start over and make samples and ship samples again…
HRRM Copper Gutter Brackets. These are designed to have the back of the gutter set […]
HRRM Copper Gutter Brackets
HRRM Copper Gutter Brackets. These are designed to have the back of the gutter set a 1″ below the roof deck.
Two samples for approval. Job might be about 300.
AutoClear I-ZINC Series Leaf and Debris Diverter Downspout Cleanout
AutoClear I-ZINC Series Leaf and Debris Diverter Downspout Cleanout.
A lot of pictures here but showing our new packaging. Important for safe shipping of Units.
SideRider Copper Gutter Brackets
SideRider Copper Gutter Brackets. These are made to fit World Gutter Systems 6″ Euro Style Gutter. Some are Right Side Mount and some are Left Side. 3 different pitches.
AutoClear I-PCSS Series Downspout Cleanouts Leaf and Debris Diverters Filters
AutoClear I-PCSS Series Downspout Cleanouts Leaf and Debris Diverters Filters.
Please Note that the ones for the 4″ by 3″ Downspouts have Screws on the top. Those Screws hold a Removable Diverter Plate. A Diverter Plate forces water flowing down the front interior side of the downspout to the rear or more central part of the AutoClear Box. Diverter Plates are not necessary for downspouts that are 3″ by 2″ and could actually hamper Leaves and Debris from entering the AutoClear Box. See pictures looking down into the inlets for the two sizes.
Radmont Ornamental Decorative Copper Downspout Straps and AutoClear Brasstonian
Radmont Ornamental Decorative Copper Downspout Straps and Custom AutoClear Brasstonian.
This job was custom across the board. The Flange Depth of the bands had to accommodate fitting over the Wishbone style brackets that have the spring on the face. Plus just about all different depths because of the stone work that the downspouts mounted to. Each Band is Numbered per Customer’s Specifications for Downspout Location and also for Band Position. The AutoClear was made to go “Inline” style.