AutoClear I Series in Copper start Production
AutoClear I Series in Copper start Production. While we have PCSS already moving – we are getting a jump start on the Copper ones as well.
HRFDT Copper Gutter Brackets for 6″ Half Round Gutters (KWM Gutter Machine) Round 3
HRFDT Copper Gutter Brackets for 6″ Half Round Gutters (KWM Gutter Machine) Round 3
Round 3 – another 160 Brackets. About 2 or 3 more Rounds to go before this order will be completed.
HRFDT Copper Gutter Brackets for 6″ Half Round Gutters (KWM Gutter Machine)
HRFDT Copper Gutter Brackets for 6″ Half Round Gutters (KWM Gutter Machine)
Round 2 – another 160 Brackets. About 3 more Rounds to go before this order will be completed.
RDS Copper Downspout Brackets for 5 Inch Round Copper Downspouts
RDS Copper Downspout Brackets for 5 Inch Round Copper Downspouts.
We confirmed that the Downspout Diameter was 5.00″ prior to fabrication.
European or Metric Size Downspouts can be 4-3/4″ so we were just making sure…
Also note that the bag for Hardware says 35 Sets. Only 28 are needed but this order will end up in New York City and Home Depot is not around the Corner…
Torres Copper Downspout Bracket for 4″ Round Copper Downspouts
We did these brackets about 10 years ago for the same project. 7 new Buildings…so we will have to make a couple hundred or so…
We are making Gutter Brackets for the project as well. Well Over 1000 of them. Thanks to our Buddy Kelly in Hawaii!
Knoke Galvanized Steel Downspout Brackets for 3″ Round Downspouts
This Job called for 5 Different Stand Off Dimensions.
As Downspout Sizes are all over the map for 3″ Round Downspouts we had the customer send us a sample of his downspout so we could get a perfect fit.
Varni Copper Downspout Brackets for 3″ Round Copper Downspouts
Varni Copper Downspout Brackets for 3″ Round Copper Downspouts
AutoClear Brasstonian Leaf and Debris Diverter Filter Clean Out for 3″ Round Copper Downspouts into 3″ PVC Drain
AutoClear Brasstonian Leaf and Debris Diverter Filter Clean Out for 3″ Round Copper Downspouts into 3″ PVC Drain
SideRider Copper Gutter Brackets
This is only 10 Brackets for our Buddy Chad Y. He wanted 9 that would mount on the Left Side of the Rafter and 1 for the Right Side. Our SideRider brackets are just a little bit different than others as they are designed to completely clear the Rafter as you push the Gutter back. This will enable you to actually put the back of the gutter against the Rafter Face if necessary. You have to capture the water! Also these Brackets are made to fit the Reverse Bead Style Gutter as manufactured by KWM. Click Here […]