Custom Brasstonian AutoClear
This is a Custom Modified AutoClear
AutoClear Brasstonian with Standard Rod Pack Leaf and Debris Diverter for 4″ Round Corrugated Copper Downspouts
Only One for this order but for a past Customer who has ordered before…
HRFDT Copper Gutter Brackets for Half Round Copper Gutters
Per Architect Request we were asked to modify our HRF Gutter Bracket and install Front and Rear Fold over Tabs.
Little tricky but have a good plan now. This is the first 160 Brackets for a project that will require well over 1000.
This order was a RUSH. We received the Gutter Sample from Kelly in Hawaii on Wednesday. Prototyped on Thursday and Began Production on Friday. Today is Sunday and will package up and ship tomorrow!
We don’t usually get orders out this quickly – even for RUSH – but Kelly sends us the Greatest Hawaiian Coffees for the Orders we do […]
HRRM Copper Gutter Brackets to fit 6″ Half Round Gutters as manufactured by Berger Brothers
Only 35 for this order but we have made 100’s for this customer. Old World Roofing. They prefer to bend the back roof mount themselves – so we just make the J.
You will notice the Hardware Bag says 36. We always provide a few extras. Been there and did that. So extra is good to have. Only one Extra Set for this order but we would imagine that they have quite a few Extras from past orders…
Radmont Radius Ornamental Decorative Copper Downspout Bands Straps
50 For this Project. Radmont Radius is one of our most Popular Ornamental Decorative Copper Downspout Bands Straps. This band has a Unique Rolled Front U section that is all one Piece! Plus we can Roll them for any Size between 3″ to 4-1/4″.
HR6 Copper Gutter Brackets and Spreader Tension Bars for 6″ Half Round Copper Gutters
Notice the Black Dots on the Spreader Tension Bars. That’s because the angles are very close and the one with the Dot goes to the Back of the Gutter.
These are made to fit Gutters as manufactured by World Gutter Systems.
AutoClear Brasstonian Standard Copper Downspout Cleanouts Leaf Debris Diverters Filters for Rectangular Copper Downspouts
While this might be a single AutoClear…It marks number 30 that have been done this past month. We used to average about 20 a month and that number has been growing.
Fleur-di-Lis Ornamental Decorative Copper Downspout Bands Straps for 4-1/2″ by 3″ Rectangular Copper Downspouts
Fleur-di-Lis Ornamental Decorative Copper Downspout Bands Straps for 4-1/2″ by 3″ Rectangular Copper Downspouts
70 For this Project. 10 were 1/2″ deeper in Depth to accommodate a downspout stand off condition.
RDSM Copper Downspout Brackets for 4″ Round Copper Downspouts
Last ones we believe for the University of Virginia. This order makes the count for the project at 490 RDSM Copper Downspout Brackets to date.