AutoClear I-PCSS Powder Coated Stainless Steel Leaf and Debris Diverters Filters Screens Cleanouts
AutoClear I-PCSS Powder Coated Stainless Steel Leaf and Debris Diverters Filters Screens Cleanouts
Knoke Downspout Brackets in Galvanized Steel for 5.5″ Stand Off
Knoke Downspout Brackets in Galvanized Steel for 5.5″ Stand Off. These brackets were made to fit a 4″ downspout with a total circumference of 12-3/4″. Most are 12-5/8″. If we get proper information our brackets will fit your downspouts perfectly.
RDSU Copper Downspout Brackets for 3″ Round Copper Downspouts
RDSU Copper Downspout Brackets for 3″ Round Copper Downspouts
AutoClear I-COPPER Series Downspout Leaf and Debris Diverters Filters Screens with Soldered in Place Diverter Plates
AutoClear I-COPPER Series Downspout Leaf and Debris Diverters Filters Screens with Soldered in Place Diverter Plates. Only about 5 of these left in stock.
AutoClear I-COPPER Series Downspout Leaf and Debris Diverters Filters Screens to to Freedom Gray Coated
AutoClear I-COPPER Series Downspout Leaf and Debris Diverters Filters Screens to to Freedom Gray Coated.
You will notice a small difference in the Surface Appearance of these units. Normally our last step is to hand rub the exterior with an abrasive pad and oil. Customer specified NO OIL on units. We are custom making Argon Welded Stainless Steel Rod Packs for these units. They are next in process but Customer wants these shipped to his Freedom Gray coating guy ASAP.
There are a lot of pictures of this order as wanted to show the Coating company the packaging etc. that will be […]
AutoClear I-COPPER Leaf and Debris Diverter Filter Cleanout for 4 by 3 downspouts
AutoClear I-COPPER Leaf and Debris Diverter Filter Cleanout for 4 by 3 downspouts.
HRU Copper Gutter Brackets for 6 inch Half Round Copper Gutters pt. 3
HRU Copper Gutter Brackets for 6 inch Half Round Copper Gutters pt. 3.
This is we believe the last 100 off the brackets required for the project.
These 100 bring the total to 300.
Fleur-de-Lis 3 Ornamental Decorative Copper Downspout Bands
Fleur-de-Lis 3 Ornamental Decorative Copper Downspout Bands. These were VERY tricky to produce. I have made 1000’s of bands over the years and this one was a true challenge. That little bead around the face was a real culprit. Normally in trials I can get a good ear produced in 4 to 6 attempts. This one took 23…
Winthrop Ornamental Decorative Copper Downspout Bands in Freedom Gray Round 2
Winthrop Ornamental Decorative Copper Downspout Bands in Freedom Gray Round 2.
These are the same 4 bands that we did awhile ago but customer sent back to us to modify for 2″ Stand Off Condition.
Seems simple but VERY difficult to do…
HRC Copper Gutter Brackets part 2
HRC Copper Gutter Brackets. This is the second 100 for the job that has now turned into 300. So one more round to go. Customer requested an additional 7/8″ to be added to the part that grabs the rafter to get the gutter to ideal drip line position. You will notice in some pictures that there is a back tab that is partially bent. We recommend placing a piece of the gutter into the bracket and starting that fold. Sometimes (depending on elevation) that tab can be a tad bit difficult to fold as it may be almost touching the […]