Rectangular Copper Downspout to Round Drain Transitions

//Rectangular Copper Downspout to Round Drain Transitions

Rectangular Copper Downspout to Round Drain Transitions

Rate this post

Rectangular Copper Downspout to Round Drain Transitions

These were a little tricky. Transition a 4.00″ by 3.00″ Downspout into a 4″ drain but also have a collar on a 6 degree angle for the sill it is going through…
We also put gussets in the corners to help route the water into the drain…First of 12 or so for the project…plus two that will go into the wall face.

By |2018-10-05T22:27:59+00:00February 23rd, 2018|Custom Copper Fabrication|0 Comments

Leave A Comment