Copper Downspout Bracket Bracket to fit 3″ Round Copper Downspout Using Using 1-1/4″ by 3/16″ Bar Stock with a 3/4 Stand Off Shown Min. Stand Off Dimension 3/4″
Add $2.00 per Inch for Off Set greater than 1" for 1-1/4" and 1-/2"Bracket Width Add $4.00 per Inch for Off Set greater than 1" for 2" Bracket Width
3 Pieces at Specific Stand-Off One Piece Front section with two rear tabs Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
Copper Downspout Bracket 1-1/2″ Width Shown @ 2″ Stand Off sized to fit 4″ Round Copper Downspout Min. Stand Off Dimension 7/8″ (1″ @ 3/16″ thickness material)
Add $2.00 per Inch for Off Set greater than 2" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 2" for 2" Bracket Width
Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
KNOKEDSBSQ For Square Cornered Downspouts 3 Pieces at Specific Stand-Off One Piece Front section with two rear Legs
Add $2.00 per Inch for Off Set greater than 3" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 3" for 2" Bracket Width
Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
3 Pieces at Specific Stand-Off
Add $2.00 per Inch for Off Set greater than 1" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 1" for 2" Bracket Width
Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
Add $2.00 per Inch for Off Set greater than 1" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 1" for 2" Bracket Width
DSB90C 90 Degree Corners for true square cornered downspouts.
Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
Copper Downspout Bracket Bracket to fit 4″ by 3″ Copper Downspout Using 1-1/2″ by 1/8″ Bar Stock with a 2-1/8″ Stand Off Shown Min. Stand Off Dimension 3/4″
Add $2.00 per Inch for Off Set greater than 3" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 3" for 2" Bracket Width
Downspout Bracket 2″ and 1-1/4″ Widths Shown sized to fit 3″ Round Copper Downspout
2 Pieces at Specific Stand-Off Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
Copper Downspout Bracket 1-1/4″ Width Shown sized to fit 3″ Round Copper Downspout Min. Stand Off Dimension 3/4"
Add $2.00 per Inch for Off Set greater than 3" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 3" for 2" Bracket Width
1-1/4″ Width Shown modeled with 4″ by 3″ Copper Downspout Min. Stand Off Dimension 1.5″
Add $2.00 per Inch for Off Set greater than 3" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 3" for 2" Bracket Width
1-1/4″ Width Shown sized to fit 4″ Rectangular Copper Downspout Min. Stand Off Dimension 3/4
Add $2.00 per Inch for Off Set greater than 3" for 1-1/4" & 1-1/2" Bracket Width Add $4.00 per Inch for Off Set greater than 3" for 2" Bracket Width
Please Note: For orders of less than 20 Units 25% will be added to Item Cost for Small Order Setups Charge
Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
Bracket to fit 4″ Round Copper Downspout Using 1-1/2″ by 1/4″ Bar Stock with a 1-1/2″ Stand Off Min. Stand Off Dimension 1"
Add $3.00 per Inch for Stand Off greater than 1-1/2"
Adjustable Stand Off Copper Downspout Brackets - Features Cut to Length Components to achieve Desired Stand Off Dimensions - Bracket to fit 4″ Round Copper Downspout Using 2″ by 3/16″ Bar Stock with @ 3-3/4″ Stand Off Shown
Min. Stand Off Dimension 1-3/4″
Add $2.00 per Inch for Off Set greater than 3"
Adjustable Stand Off Copper Downspout Brackets - Features Cut to Length Components to achieve Desired Stand Off Dimensions -
The Ultimate in Adjustable Stand Off Brackets. You will have total control over the stand off dimensions required for your specialized projects to keep your downspouts running true in appearance for just about any mounting conditions.
Bracket to fit 4″ Round Copper Downspout Using 1-1/4″ by 3/16″ Bar Stock with a 2″ Stand Off ShownMin. Stand Off Dimension 1-3/4″
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Downspout Brackets is 10 Units.
Adjustable Stand Off Copper Downspout Brackets - Features Cut to Length Components to achieve Desired Stand Off Dimensions - Mill Finish Aluminum or Galvanized Steel or Steel Pricing Information
Bracket to fit 4″ x 3″ Copper Downspout Using 1-1/4″ by 3/16″ Bar Stock with a 3″ Stand Off Shown Min. Stand Off Dimension 1-3/4″
Add $2.00 per Inch for Off Set greater than 3"
Please Note: For orders of less than 20 Units 25% will be added to Item Cost for Small Order Setups Charge
EPR-338-48 Escutcheon Plates Attractive Covers to hide the Mounting Bracket Portion of a *TR Bracket
Escutcheon Plates are approximately 3-3/8″ diameter and will cover a modified profile mounting bracket
Attractive Covers to hide the Mounting Bracket portion of a Threaded Rod Bracket
Escutcheon Plate EPR-338-48
HR Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
Copper Gutter Brackets / Hangers to fit Standard Half-Rounds with Standard Fascia Conditions CopperShoppe Fascia mount Copper Gutter Brackets are designed so that you can attach the brackets to the guttering prior to installing the guttering on the building if you wish to. Bracket mounting holes are located so that they are at and above the rear side of the gutter. This style bracket will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
HRF Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters with Standard Fascia Conditions
HRC Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Copper Gutter Brackets / Hangers to fit Standard Half-Rounds with Cant Style Fascia Conditions CopperShoppe Custom Cant Style Fascia Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
HRC-PLUS Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Copper Gutter Brackets / Hangers to fit Standard Half-Rounds with Cant Style Fascia Conditions CopperShoppe Custom Cant Style Fascia Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
HRRM Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Copper Gutter Brackets / Hangers to fit Standard Half-Rounds with Roof Hanger Conditions
HRRM Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
Brass Bolt, Nut and Bronze Lock Washer for front side of bracket attachment to Gutter included with each bracket.
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
HRRMA Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Adjustable Drop for Creating Pitch Strong - Secure - Stable to keep the Gutter in it's place THE ULTIMATE ADJUSTABLE ROOF MOUNT COPPER GUTTER BRACKET! Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
Side-Rider Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Side Rider Copper Gutter Brackets / Hangers to attach to Rafter Sides CopperShoppe Custom Rafter Mount Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today. These Gutter Brackets fasten to the side of the Rafter Tail for positive secure mounting.
SIDE-RIDER This Half Round Copper Gutter Bracket allows you to mount the bracket to the side of the Rafter at any location. This bracket not only twists to align with the rafter face but also has an off-set so that you can pull the bracket further back on the rafter side to actually get the gutter back flush to the rafter tail face! NOTE: This Gutter Bracket Available in Right Side or Left Side Mounting profiles. Right Side Mounting Profile is Shown for Standard Style. Specify Left & Right Mounting Quantities when ordering. Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
NOTE: This Gutter Bracket Available in Roof Pitch of 4/12 and above.
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
SIDE-RIDER-HIP This Half Round Copper Gutter Bracket allows you to mount the bracket to the side of the Hip Rafter at any location. This bracket not only twists to align with the rafter face but also has an off-set so that you can pull the bracket further back on the rafter side to actually get the gutter back flush to the rafter tail face! NOTE: This Gutter Bracket Available in Right Side or Left Side Mounting profiles. Left Side Mounting is Shown for Hip Style. Specify Left & Right Mounting Quantities when ordering. Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
Copper Gutter Brackets / Hangers to attach to Rafters CopperShoppe Custom Rafter Mount Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
HRU Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock This Copper Gutter Bracket uses 2" by 3/16" Copper Bar Stock for the U-Style rear bracket portion.
Bracket Shown with Optional Rear Fold Over Tab - Additional $2.50 to Cost of Bracket
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
Copper Gutter Brackets / Hangers to attach to Rafters CopperShoppe Custom Rafter Mount Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
HRU*-48 Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock This Copper Gutter Bracket uses 48 oz. (.065) Copper for the U-Style rear bracket portion.
Bracket Shown with Optional Rear Fold Over Tab - Additional $2.50 to Cost of Bracket
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
Copper Gutter Brackets / Hangers to attach to Rafters CopperShoppe Custom Rafter Mount Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
HRCU For Rafter Tails that are on a Cant Angle Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock This Copper Gutter Bracket uses 2" by 3/16" Copper Bar Stock for the U-Style rear bracket portion.
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
Copper Gutter Brackets / Hangers to attach to Rafters CopperShoppe Custom Rafter Mount Brackets eliminate the need for Wedges, Cant Strips, etc. and will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
HRCU*-48 Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock This Copper Gutter Bracket uses 48 oz. (.065) Copper for the U-Style rear bracket portion.
Bracket Shown with Optional Rear Fold Over Tab - Additional $2.50 to Cost of Bracket
Please Note: For orders of less than 20 Units 50% will be added to Item Cost for Small Order Setups Charge. Additionally Minimum Quantity for Gutter Brackets is 10 Units.
HRSB Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Copper Gutter Spreader/Tension Brackets
HRSB Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
NOTE: This is ONLY the Spreader/Tension Bar ONLY. The HR Gutter Bracket that Cradles the Gutter is shown only for Reference and purchased separately.
Please Note: For orders of less than 50 Units 25% will be added to Item Cost for Small Order Setups Charge.
Additionally Minimum Quantity for Gutter Brackets is 30 Units.
HRGH Copper Gutter Helper Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Fabricated out of 1" wide by 1/8" thick Solid Copper Bar Stock
Copper Gutter Brackets / Hangers to fit K-Style Gutters with Standard Fascia Conditions CopperShoppe Fascia mount K-Style Copper Gutter Brackets are designed so that you can roll the brackets onto the guttering prior to installing the guttering. They will be floating until you actually fasten them at your designated spacing. You don't have to install brackets first then gutter second. Less setups and less time saves you money. Bracket mounting holes are located so that they are above the rear side of the gutter and approximately 1" below the back lip of the gutter. This style bracket will make your installations easier along with offering your clients the Strongest Gutter Brackets available today.
Commander Fabricated out of 1-1/4" wide by 3/16" thick Solid Copper Bar Stock
The # 1 Choice for the Highest Quality Custom Copper Guttering and Downspout Accessories
Ornamental / Decorative Copper Downspout Bands
We can Custom Make the Bands to Exactly fit Any Size Rectangular Downspout All Our Products are Custom Made to Suit Your Projects Needs
The # 1 Choice for the Highest Quality Custom Copper Guttering and Downspout Accessories
Ornamental / Decorative Copper Downspout Bands
We can Custom Make the Bands to Exactly fit Any Size Round Downspouts All Our Products are Custom Made to Suit Your Projects Needs
(Shown in Galvanized Steel. Copper and Freedom Gray Copper Available)
The # 1 Choice for the Highest Quality Custom Copper Guttering and Downspout Accessories
Ornamental / Decorative Copper Downspout Bands
We can Custom Make the Bands to Exactly fit Any Size Rectangular Downspout All Our Products are Custom Made to Suit Your Projects Needs
All Downspout and Stand Off Dimensions can be altered to suit your Project Needs
Stand Off Brackets - Fabricated to a Specific Stand Off Dimension up to 8"
Bracket to fit 4″ Round Copper Downspout Using 1-1/2″ by 1/8″ Bar Stock with a 3/4 Stand Off Shown Min. Stand Off Dimension 3/4″This Bracket is the In Between Style of the RDSF and RDS. Stand Off can be between 1/8″ and 8″ Note that there is no Rear Plate for this bracket and the Downspout is held in place by 2 #44 Copper Rivets
Add $2.00 per Inch for Off Set greater than 3" for 1-1/4" Bracket Width Add $4.00 per Inch for Off Set greater than 3" for 2" Bracket Width
HRFDT Copper Gutter Brackets / Hangers for Half Round and Euro Style Half Round Copper Gutters
Copper Gutter Brackets / Hangers to fit Standard Half-Rounds with Standard Fascia Conditions.
