Robert Anthony

/Robert Anthony

About Robert Anthony

Hello, While I may own the place... I will still sweep the floors and take out the trash... I know that every single thing to make a great product starts with knowing that EVERY THING needs to be done from start to finish with no stones left unturned.

RDSF Copper Downspout Brackets

RDSF Copper Downspout Brackets

This is the first 90 out of 150 going to be installed on the University of Virginia. Project could be a total of almost 500 when it is done. It is a custom bracket in that they wanted to keep the downspout off the wall 3/4″ but have no back plate like our RDS style. We put two holes in the bracket so that the downspout could be riveted to the bracket and be held in place.

By |2018-05-11T12:58:26+00:00February 2nd, 2018|Copper Downspout Brackets|0 Comments

Varni Copper Downspout Brackets

Varni Copper Downspout Brackets for 3″ Round Copper Downspouts

Note we always supply extra hardware just incase…. The 90 Combos Hardware is for the Gutter Brackets that were shipped previously. This will end up in Antigua Bay and the Gutter Brackets were installed a while ago as they were Roof Mount. We held the shipping of the Combo Screws till when the Gutters were to actually be installed (so they would not become lost on the site).

By |2018-05-11T13:07:13+00:00January 24th, 2018|Copper Downspout Brackets|0 Comments

AutoClear MAXIMUS

Over the years we thought we did just about any AutoClear imaginable….well that’s going out the window!

Just finished up this project for 9 AutoClear Brasstonian Series.
You will notice the one that is 10-3/8″ wide by 10″ deep by 12-1/2″ tall. For a custom 8″ by 8″ Downspout going into a 6-3/4″ Drain.

We also supplied a custom extension for the Bottom just incase there is a water outflow issue…never made one this big before and just trying to cover the bases.

Click Here to Go to our AutoClears Page for more Information and Pricing

Milner Copper Leader Heads Collector Boxes for 4″ Round Copper Downspouts

Milner Copper Leader Heads Collector Boxes for 4″ Round Copper Downspouts

Just two of them….but maybe a couple of chimney caps to follow down the road…

By |2018-05-11T13:28:28+00:00December 19th, 2017|Leader Heads|0 Comments

ZAK Copper Downspout Brackets for 2-1/8″ diameter Copper Downspouts

ZAK Copper Downspout Brackets for 2-1/8″ diameter Copper Downspouts

Only 4. But we do small orders as well as big ones. There is a small order fee though…

By |2018-11-13T14:14:50+00:00December 16th, 2017|Copper Downspout Brackets|0 Comments

AutoClear Brasstonian Leaf and Debris Diverters Cleanouts for Copper Downspouts

AutoClear Brasstonian Leaf and Debris Diverters Cleanouts for Copper Downspouts

Two orders here. 6 Standard for 4″ Round Copper Downspouts and one Ultra for 3″ Round Copper Downspouts.

Click Here to go to our AutoClears page for more Information and Pricing

By |2019-03-03T22:40:31+00:00December 13th, 2017|AutoClears, Brasstonian AutoClears|0 Comments